Accu-Lube Reservoirs

The Ten Ounce Reservoir is standard on Accu-Lube applicators with 1 to 3
nozzles. This rugged reservoir is made from injection molded
polycarbonate and the enclosure cap is injection molded polypropylene. 
The polycarbonate reservoir is transparent, allowing for visual
inspection of contents.  It will tolerate temperature changes from
minus 40º F. to maximum of 150º F. without any significant dimensional
changes. The reservoir dispenses liquid, by gravity into the applicator
and has a vented cap. When installing do not tighten by hand please use
a wrench on the pipe mounted thread.

Specifications:

Viton® is a registered trademark of DuPont Dow Corp.

One Quart Reservoir, Part# 9381

One Gallon Reservoir, Part# 9384

These reservoirs include a
metal filter (100 mesh) dispense lubricant by gravity to the Accu-Lube
pumps through a 1/4” NPT pipe fitting on the bottom. The durable,
crystal clear acrylic reservoirs are useful for many applications where
it is desirable to visually inspect the presence and clarity of the
lubricant.  Fill from above through the self-closing filler cap on
top. Available in three sizes.

Specifications:

Low Level Sensor…….Polypropylene

One Quart Reservoir w Low Level Sensor, 9383

One Gallon Reservoir w Low Level Sensor 9386

The same as the
acrylic reservoirs above but these reservoirs have a float inside that
can be wired to closes a circuit when the lubricant level almost reaches
the bottom. This is useful to connecting low level warning light or
sending signals to PC or CNC controllers. Available in quart or gallon
sizes.

Max Recommended Current:

115 VAC 0.25 AMP

Part # 90000

Install the reservoir to a location with more access. Keep above the
applicator to maintain a gravity flow.