Accu-Lube Hose

Air/oil hose assemblies have an oil supply tube running inside the braided air hose. The length indicated is the length of the air hose with the oil tube about 18” longer to be fed into the nozzle.

O-Ring

Part Number: 9490A

Don’t forget to order new O-rings, you will need them when
installing the oil tube to the Accu-Lube style pump.

Compression Fitting Sleeve

Part Number: 9254

If you are replacing the hoses on your brass style pumps you will
need new compression fitting sleeve.

Part Number: 9363

1/4” I.D. x 7/16” O.D. durable air hose. Caries the air in the air/oil
assembly hoses. Sold by the foot.

Part Number: 9360

1/8” O.D. hard poly tube runs inside the air tube in air/oil assembly.
Be careful not to kink the tube when handling. Sold by the foot.

Part Number: #9361

This hose is used to supply the piston side of the pump with pulsating
air from the frequency generator. Sold by the foot.

Part Number: 9362

This hose is used to supply the air flow side of the pump. Sold by the
foot

Part Number: 9362B

1/4” O.D. tubing used on the FLR style applicators. Sold by the foot.

Used to connect an EcoBooster to
Machine.