Accu-Lube Electric Solenoids 55 Series


Electric Solenoids
55 Series 3/8" NPT (for
applicators with 5 or more nozzles) MAC Brand

Electric on/off
air flow control valve.  Install in-line of any 3/8” compressed air
supply and automate the on/off function by energizing with electricity. 
Replacement for an Accu-Lube single or double nozzle applicator or use
to automate the air supply to a Junior style applicator.  Also used to
automate the flow to an external air blow off nozzle for removing chips
from the work area.  Available in three voltage configurations.

Part No. Description
9555 Electric Solenoid (24 VDC) on/off Valve (3/8"
NPT)
9553 Electric Solenoid (110 VAC) on/off Valve (3/8"
NPT)
Spc. Order Electric Solenoid (220 VAC) on/off Valve (3/8"
NPT)



Electric Solenoids Coils, for 100 Series and 55 Series Solenoids

Although dirty or wet air supply can
cause a solenoid to fail, most of the time all you need is a new coil
when the solenoid fails.  Simple to replace in the field with only two
screws in the front, choose the correct voltage
 

Part No. Description
9531 Electric Solenoid Coil Only (24 VDC)
9533 Electric Solenoid Coil Only (110 VAC)
9534 Electric Solenoid Coil Only (220/240 VAC)
Technical Data Fluid :
Pressure range :
Lubrication :
Filtration :
Temperature range :
Flow (at 6 bar, ΔP=1bar) :
Leak rate :
Coil :
Voltage range :
Power :
Response times
Compressed air, vacuum, inert gases
Vacuum to 150 PSI
Not required, if used select a medium aniline point lubricant (between
180°F and 210°F)
40 μ
0°F to 140°F (-18°C to 60°C)
0.18 Cv
50 cm3/min
General purpose class A, continuous duty, encapsulated
-15% to +10% of nominal voltage
-Inrush : 14.8 VA Holding : 10.9 VA, = 1 to 17 W
24 VDC (8.5 W) Energize : 7 ms De-energize : 2 ms
120/60 Energize : 3-8 ms De-energize : 2-7 ms